How to Install S5830XWKPO Android 2.3.3 on Samsung ACE S5830
Prerequisite
- Samsung USB Drivers for S5830
- S5830XWKPO.rar Firmware file
- Odin 4.38 software & OPS for flash
- Charge your phone battery up to a good level
- Take complete backup of all your mobile data
Now follow these steps carefully or refer the attached video -
Phase 1- setting up PC and backup
- Install the Samsung USB drivers
- Unzip the main firmware file & ops file and you will see these five files
1. APBOOT_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5,
2. CODE_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5,
3. Cooper_v1.0.ops,
4. GT-S5830-csc-LUXKP1.tar.md5,
5. MODEM_S5830XWKP7_CL407346_REV03.tar.md5, - Take Backup of your contacts messages and other data from your phone. Please note that this procedure doesn`t format your internal memory, only messages, contacts and apps will be erased.
- Shut down Samsung Kies completely
- Run Odin 4.38 which you have already installed
- Power off your Samsung ACE and wait till complete switch off
Phase 2 - Upgrading the firmware
- Hold Volume down key + Home button key and press power on to goto download mode
- Connect your phone with USB cable
- You should get the message “Added! !” under the Odin’s message box
- Put the files like this in Odin:
OPS = Cooper_v1.0.ops,
Boot = APBOOT_S5830XWKPO_CL400247_REV03_user_low_true.tar .md5
Phone = MODEM_S5830XWKP7_CL407346_REV03.tar.md5,
PDA = CODE_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
CSC = GT-S5830-csc-LUXKP1.tar.md5 - Hit the start button and process will begin, Wait until your phone gets restart and then unplug the cable
You will have S5830XWKPO Android 2.3.3 on your ACE :)
EmoticonEmoticon